ARAG 46742DX1, Installation, Use And Maintenance Manual

Page: 72 / 96

72
13.1.8
F7 Area
Activate the procedure to calculate the field area, while driving on borders
1 Press
F7
to start the procedure and calculate the area (functions list is no longer displayed).
Message
Select field border
is displayed to set machine side to be used as field outer edge.
2
Press
F5
(
Left
) or
F6
(
Right
): the display will show a red line drawing the field border as far as the tractor moves along.
Fig. 243
Following are the two possible instances:
field boRdeR on machine left-hand Side field boRdeR on machine Right-hand Side
Fig. 244
Fig. 245
3
Drive along field borders or border of the area to be calculated.
To complete the procedure, view again the corresponding functions list page (Fig. 243) and press
F7
.
4
Message
Boundary closure?
is displayed. Press
OK
(Fig. 246).
5
To view calculated data (
Calculated area
area and
Perimeter
), press
SHIFT
a few times until viewing
Job data
page on the display (Fig. 247).
Fig. 246
Fig. 247
Field outer edge (red
line) follows the path
of the outermost
section valve open.
When all section valves
are closed, field border
(red line) starts from boom
centre.
WORK FUNCTIONS - PAGE 1