Aqua Phase AQ-F250, Operating Manual, Page: 7 / 89

GENERAL INFORMATION
CONTROL PANEL SWITCHES &
FUNCTIONS
Switch Options/Function
“ STOP ” Button
When pressed, will stop all Aqua Phase wash functions
“ START ” Button
Must be pressed to start any Aqua Phase wash function
Allows you to select the length of wash: WASH TIME Selector Switch
“
3 MIN
” = Three minute wash cycle
“
5 MIN
” = Five minute wash cycle
“
7 MIN
” = Seven minute wash cycle
“
RUN/DRAIN
” Selector Switch
“RUN” : Set to “ RUN ” to wash an item.
“ DRAIN ”: Set to “ DRAIN ” to drain the water in the machine.
*WASH MODE Selector Switch
The water should be drained when you are done washing for
the day or if you relocate the machine. In order for the
“DRAIN” function to work, the Wash Mode switch must be
set to “CLEAN & DISINFECT” or “CLEAN ONLY”.
CLEAN & DISINFEC T : When this mode is selected, Aqua
Phase will perform a complete wash and rinse for the time
specified on the WASH TIME Selector Switch. It will then
automatically apply disinfectant solution
CLEAN ONLY : When this mode is selected,
Aqua Phase
will perform a complete wash and rinse cycle for the length
of time specified on the WASH TIME Selector Switch. It
will not apply disinfectant.
DISINFECT ONLY : When this mode is selected,
Aqua
Phase
will apply disinfectant solution only. It will not wash or
rinse.
* Wash Mode selection is part of the
Disinfectant Application System
option if purchased.
Aqua Phase, A Division of Mid-State Stainless, Inc.

330 W. Benson Ave.

PO Box 228

Grantsburg, WI 54840

USA
800-208-9274  715-463-5851  FAX: 715-463-5853  Email: aquaphase@medwashers.com  Web: www.aqua-phase.com