
CONTROLLER INFORMATION
Aqua Phase, A Division of Mid-State Stainless, Inc.
330 W. Benson Ave.
PO Box 228
Grantsburg, WI 54840
USA
800-208-9274
715-463-5851
FAX: 715-463-5853
Email:
Message One
Run mode selected
.
•
Doors closed.
•
Ready to start.
Message Two
Drain mode selected
.
•
Doors closed.
•
Ready to start.
Message Three
Machine filling for wash cycle
•
Run mode selected.
•
Doors closed.
•
"Start" button pushed.
Message Four
Machine is in Wash Cycle.
•
Machine done filling for
wash
cycle.
•
Detergent solution
automatically injected.
•
Wash cycle will
run
for time
selected (3,5, or 7 minutes)
Message Five
•
Wash water is being drained
OR
•
Drain mode selected and
"Start" button pushed.
Machine done with wash cycle.
Machine beginning Rinse cycle.
•
Wash cycle complete
•
Wash water drained
•
Machine
is filling with fresh
water for
Rinse cycle.
Message Seven
Message Eight
Message Nine
Disinfectant Application System Running
(Option)
•
Fresh water mixed with
disinfectant solution.
•
Item in Wash Chamber sprayed
with solution.
1.
Clean & Disinfect Selected
before wash cycle started.
Wash
& Rinse cycle done.
2.
Disinfect Only
selected &
"Start" button pushed.
Message Ten
Machine is in rinse cycle.
•
Machine done filling for
---
rinse cycle.
•
Rinse solution
automatically injected.
•
Rinse cycle approximately
1.5 minutes.
Machine completed selected
operation.
Front door of Wash Chamber
must be opened before next
operation can begin.
**After Wash Cycle, prior to
draining of wash water.**
Message Six
C
heck Low Level Float
•
Item removed/loaded.
•
Wash Chamber inspected
for debris.
•
Safety switches
operational.
•
Is float is free of debris?
•
Is float is operating properly?
•
Call technical support if this
does not solve problem
Summary of Contents for AQ-F250
Page 2: ......