Aqua Phase AQ-F250, Operating Manual, Page: 21 / 89

WEEKLY, MONTHLY &
ANNUAL OPERATING
PROCEDURES
Weekly (or as needed):
WARNING--Wear Personal Protective Gear/ Clothing when working with ANY chemicals.
1. Inspect the front door gasket for wear or damage. Replace if necessary.
2. Check the Spray Nozzles & Level Sensors (located inside the Wash Chamber) for
clogging. Clean if necessary.
3. Check that the Drain Trough Hinged Reservoir Screen is clean & in place. This is
located at the bottom, inside front of the Wash Chamber.
4. Check the Power Cord for any wear or damage. Test and reset the GFCI in the Aqua
Phase Power Cord. (If the Power Cord appears to be damaged in any way, do not
operate the Aqua Phase.)
5. Use de-liming agent to reduce scale build-up if needed. Contact Aqua Phase to order
AQ-725 De- L iming Solution.
Monthly:
WARNING- - Wear Personal Protective Gear/Clothing when working with ANY chemicals.
1. Perform the de-liming process using the Aqua Phase,
AQ-725 De-liming Solution.
The
instructions are in the Aqua Phase manual, and printed on the AQ-725 De-liming
Solution bottle.
2. If included in the water supply line to your Aqua Phase, change the Filter Element that is
inside the Water Filter Housing.
3. For Infection Control reasons, if possible change/switch the manufacture, brand, or type
of concentrated disinfectant that you are using to Aqua Phase every 30-days.
Semi-Annual:
WARNING- - Wear Personal Protective Gear/ Clothing when working with ANY chemicals.
1. Confirm the Disinfectant Concentrate Solution suction rate.
(This should be ¾ to 1 ounce
of Disinfectant Concentrate Solution suctioned into the Aqua Phase per ‘Disinfectant
Only’ cycle performed.)
2. Inspect, check and adjust the Drive Chains of the Wheelchair Wheel Rotation System
(option) .
3. Inspect, check and change (as needed) the Wheel Cleaning Brushes of the Wheel
Rotation System.
4. Inspect and replace if needed, the Primary Filter Screen.
Annual:
Complete the Annual Aqua Phase Re-Validation Check Report. (The Check List/Report is
available from Aqua Phase upon request). Re-Validation is completed for you as part of an
Aqua Phase Service Agreement.
Aqua Phase, A Division of Mid-State Stainless, Inc.

330 W. Benson Ave.

PO Box 228

Grantsburg, WI 54840

USA
800-208-9274  715-463-5851  FAX: 715-463-5853  Email: aquaphase@medwashers.com  Web: www.aqua-phase.com