24
Version 2
(fertiliser, 16 outlets):
Step
Description
Illustration
1
Using the cutting tool, cut off pieces
from the hose roll in the required length
for each transition piece.
2
Slightly loosen the clamping screws (1)
on the clamping plate using a Torx
screwdriver.
3
Insert the ends of the hoses into the
transition pieces (2) up to the stop.
NOTE: If it is too difficult to insert the
hoses, use silicone spray on the outside
of the hose.
4
Tighten the clamping screws (1).
This is how to connect the hoses to the soil tillage implement and dispersion plates:
Step
Description
Illustration
1
Insert the ends of the hose through the
openings in the large tab (3) of the dis-
persion plate and slide the fastening clip
(4) onto the hose.
2
Push the end of the hose through the
opening in the small tab (5) on the dis-
persion plate.
3
Install the fastening clip (4) on the dis-
persion plate (5).
In doing so, install the fastening clip so
that
•
the holding finger is positioned be-
tween the hose and the fastening
clip.
•
it is fixed by the hooks on the hold-
ing finger.
4.5
Removing the swell air plate
Purpose
The swell air plate guides the air from the fan over the seeding shaft. With coarse
seed types such as vetch, peas or horse gram, the swell air plate must be removed to
Summary of Contents for HG 300 M1
Page 47: ...47 10 2 Connection diagram...
