22
Requirements
The following requirement must be fulfilled for this work step:
•
None
Required components, tools and materials
For this work step, the following components, tools and materials are required:
Dispersion plates
Hexagon shaft
Bolts
Washers
Pliers
Hexagon key
Procedure for mounting with hexagon shaft
This is how to install the dispersion plates on the soil tillage implement.
Step
Description
Explanation/illustration
1
Using the pliers, bend the tabs on the
sides of the dispersion plates down by
80°.
Result:
2
Distribute the dispersion plates evenly
across the entire working width of the
soil tillage implement. Maximum spac-
ing of the dispersion plates: 75 cm
3
Push the hexagon shaft through the two
hexagonal holes in the tabs on the
sides of the dispersion plate intended
for this purpose.
4
Using the supplied bolts and washers,
fasten the dispersion plates onto the
hexagon shaft.
Result:
Summary of Contents for HG 300 M1
Page 47: ...47 10 2 Connection diagram...
