APV HG 300 M1, Operating Instructions Manual

Page: 19 / 60

19
Maintenance and repairs
Danger Where and in which sit-
uations does the dan-
ger occur? Countermeasure
Incorrectly or inade-
quately performed
maintenance work with
limited visibility Under poor light condi-
tions If necessary, maintenance must
be performed with additional
lighting.
In this section, you will learn which work steps must be performed for the installation
and commissioning of the seed drill, and what must be done and observed.
4.1 Attaching the seed drill to a soil tillage implement
Purpose
For operation on the field, the seed drill can be attached to a soil tillage implement,
such as a cultivator or a harrow. The attachment must be installed individually.
Requirements
The following requirement must be fulfilled for this work step:
•
The implement is disconnected from the power source, see
Disconnecting the
seed drill from the power source
On page 40.
Required components, tools and materials
For this work step, the following components, tools and materials are required:

Counter plate

Bolts with Ø > 10 mm, strength class 8.8 or higher

Self-locking fastenings (nuts)

Lifting gear that is suitable for the respective implement version, see
Technical
Data
On page 10 for more information.
4 Transport, installation and commissioning