12
Purpose of these regulations
These regulations aim to ensure that all persons who will be handling the seed drill
are thoroughly informed about the dangers and safety measures and observe the
safety instructions in the operating manual and on the seed drill. If you do not follow
these regulations, you are at risk of injury and material damage.
Handling the operating manual
Observe the following regulations:
•
Read the Safety section and the section relating to your work completely. You
must understand these contents.
•
Always keep the operating manual close to the seed drill for reference purposes.
There is a container for this installed on the seed drill.
•
When passing on the seed drill, be sure to pass on the operating manual.
Handling the seed drill
Observe the following regulations:
•
Only persons who fulfil the requirements defined in this operating manual may
handle the seed drill.
•
Only use the seed drill for the intended purpose.
•
Never use the seed drill for other purposes that may seem similar.
•
Observe all of the safety measures that are indicated in this operating manual
and on the seed drill.
•
Do not make any modifications to the seed drill, e.g. by removing parts or mount-
ing unauthorised parts.
•
When replacing defective parts, only use original spare parts or standard parts
approved by the manufacturer.
Operator obligations toward the personnel
As the operator, you have to ensure the following:
•
The personnel fulfils the requirements corresponding to his work.
•
The personnel has read and understood this operating manual before handling
the seed drill.
•
The regulations applicable in your country for safety at work are being observed.
Procedure in case of accident
The seed drill is designed and built so that the personnel can work without risk. De-
spite all precautions, however, unforeseeable accidents can still occur under unfa-
vourable circumstances.
Always observe your company's guidelines regarding accidents.
More information on the subject of
Intended use of the seed drill
On page 13
Personnel requirements
On page 13
Dangers and safety measures
On page 17
Summary of Contents for HG 300 M1
Page 47: ...47 10 2 Connection diagram...
