36
Required components, tools and materials
For this work step, you need the following components, tools and materials:
•
None
Overview
No. Designation
1
Brush adjustment lever
2
Setting scale
Procedure
This is how to set the brush pressure:
Step
Description
1
Pull the brush adjustment lever (1) out of the setting scale.
2
Move the brush lever to the desired position and engage it in the appropri-
ate notch of the setting scale.
The following orientation rules apply here:
•
For fine seed, increase the brush pressure up to -5.
•
For coarse seed, reduce the brush pressure up to +4.
5.8
Filling the seed tank
Purpose
The seed tank stores the seed to be spread.
Requirements
The following requirement must be fulfilled for this work step:
•
The implement is disconnected from the power source, see
Disconnecting the
seed drill from the power source
On page 40.
Required components, tools and materials
For this work step, the following components, tools and materials are required:
Seed
Summary of Contents for HG 300 M1
Page 47: ...47 10 2 Connection diagram...
