WorldCast Equinox - Release 3.1 - user manual
– 07/2011
Page 162
Whiterock Business Park - 729 Springfield Road - Belfast BT12 7FP - Northern Ireland
Tel.: +44 28 9067 7200 | Fax: +44 28 9067 7201 | http://www.aptcodecs.com
6.9. Point to Point IP Connect Feature
The Point to Point IP Connect Feature allows for a duplex IP connection to be made between 2 units.
Before initiating the connection, the user must ensure that both ends of the imminent connection are set-
up the same, i.e. algorithm, bit rate etc.
The figure below shows how to initiate the connection. Right click on one of the units you wish to have in
the connection. The menu as shown will appear. Choose Point to Point IP Connect.
Assuming all of the settings match, the user will be prompted with the following:
