APRILIA 500 Sprint Use & Maintenance Book Download

Page: 41 / 80

use and maintenance

Atlantic 125/250/500 Sprint

Operations to be carried out by the

aprilia

Authorised Dealer

After running-in 1000 km (625 mi)

Check, clean, adjust, lubricate and change, if necessary

Steering bearings - check

Engine oil filter - change

Brake fluid - check

Front suspension fluid - check

Transmission oil - change

Engine oil filter screen and magnetic screw - check

Nut, bolt, screw tightening - check

Cylinder head nut tightening - check

Brake fluid bleeding - check

Every 6000 km (3750 mi) or 8 months

Check, clean, adjust, lubricate and change, if necessary

Converter belt - check

Steering bearings - check

Engine oil filter - change

Wheel bearings - check

Secondary air scoop filter - cleaning

Converter cover air filter - cleaning

Valve clearance - check

Brake fluid - check

Front suspension fluid - check

Transmission oil - every 6000 km (3750 mi) - check

Transmission oil - change every 24000 km (14913 mi)

Engine oil filter screen and magnetic screw - check

Converter rollers and converter plastic guides - check

Wheels / tires - check

Nut, bolt, screw tightening - check

Carburetion at idle speed - adjustment

Transmission oil - every 6000 km (3750 mi) - check

Transmission oil - change every 24000 km (14913 mi)

Fuel lines - check

Every 12000 km (7500 mi) or 16 months

Check, clean, adjust, lubricate and change, if necessary

Converter belt - change

Clutch shoes - check

Brake fluid: change every 2 years

Front suspension fluid - change

Converter rollers and converter plastic guides - change

Fuel lines - change every 2 years

APRum_ATLANT125#02_##uk.book Page 41 Tuesday, March 14, 2006 5:15 PM

Summary of Contents for 500 Sprint

















































































Search results

Summary of Contents for 500 Sprint

Reviews:

Related manuals for 500 Sprint

Brands by name

Popular brands

APRILIA 500 Sprint, Use & Maintenance Book

Search results

Summary of Contents for 500 Sprint

Reviews:

Related manuals for 500 Sprint

Brands by name

Popular brands