manualshive.com logo in svg

APRILIA 500 Sprint, Use & Maintenance Book, Page: 25 / 80

Share
Download
APRILIA 500 Sprint Use & Maintenance Book Download Page 25

25

use and maintenance 

Atlantic 125/250/500 Sprint

BRAKE FLUID - recommendations

NOTE 

This vehicle is fitted with front and

rear disk brakes. Each braking system is
operated by an independent hydraulic
circuit.
The following information applies to both
braking systems.

WARNING

Sudden changes in brake lever play or a
spongy feel of the lever may indicate
problems with the hydraulic system.
If in doubt about the braking efficiency
of your bike or if you are not able to
perform routine checks, contact an

aprilia

 Authorised dealer.

WARNING

Pay special attention to the brake disc
and friction material, making sure that
they are neither dirty nor oily, especially
a f t e r   m a i n t e n a n c e   o p e r a t i o n s   o r
inspections.
Make sure the brake hose is not twisted
or worn.

KEEP AWAY FROM CHILDREN.

D O   N O T   R E L E A S E   I N T O   T H E
ENVIRONMENT.

DISC BRAKES

WARNING

The brakes are critical to your safety
and  must  always be kept in  sleek
running order. Check the brakes before
each ride.

A dirty disk will soil the pads, leading to
loss of braking efficiency. Dirty pads
must be replaced, while dirty discs
must be cleaned with a high-quality
degreaser.

Have brake fluid changed at an 

aprilia

Authorised dealer every two years.

APRum_ATLANT125#02_##uk.book  Page 25  Tuesday, March 14, 2006  5:15 PM

Summary of Contents for 500 Sprint

















































































Reviews:

No comments