APRILIA 500 Sprint Use & Maintenance Book Download

Page: 21 / 80

use and maintenance

Atlantic 125/250/500 Sprint

GLOVE/TOOL KIT COMPARTMENT

The glove compartment can accommodate
bulky objects when you leave your bike
unattended.

Insert the key (3) in the lock.

Press and turn the key counter
clockwise.

Open the compartment flap (4).

POWER OUTLET

A 12V power socket (1) is fitted inside
the helmet compartment.

It can be used to recharge small
appliances rated up to 180 W (mobile
phone, inspection lamp, etc.).

CAUTION

Prolonged use of the power socket with
the engine stopped may compromise
the battery charge.

PRESETTING THE INTERPHONE
KIT

Only for preset vehicles.

Inside the front shield is a power socket
for the interphone system control unit.

On the (right and left) sides of the central
tunnel are two standard jacks (2) for the
interphone/microphone headsets.

Have the system installed by an

aprilia

Authorised Dealer.

125

500

250

APRum_ATLANT125#02_##uk.book Page 21 Tuesday, March 14, 2006 5:15 PM

Summary of Contents for 500 Sprint

















































































Search results

Summary of Contents for 500 Sprint

Reviews:

Related manuals for 500 Sprint

Brands by name

Popular brands

APRILIA 500 Sprint, Use & Maintenance Book

Search results

Summary of Contents for 500 Sprint

Reviews:

Related manuals for 500 Sprint

Brands by name

Popular brands