manualshive.com logo in svg

APRILIA 500 Sprint, Use & Maintenance Book, Page: 38 / 80

Share
Download
APRILIA 500 Sprint Use & Maintenance Book Download Page 38

use and maintenance 

Atlantic 125/250/500 Sprint

38

SUGGESTIONS TO PREVENT 
THEFT

CAUTION

Do not use any “brake lock” devices.
F a i l u r e   t o   h e e d   t h i s   w a r n i n g   c a n
seriously damage the braking system
and lead to an accident thus provoking
serious injuries or death.

NEVER leave the key in the ignition switch
and always use the steering lock.

Park the vehicle in a safe place, possibly in
a garage or at a guarded parking place.

If possible, use the appropriate 

aprilia

"Body-Guard" shielded cable 

, or an

additional antitheft device.

Make sure you have all the necessary
documents with you and that the road tax
has been paid.

Write your personal data and telephone
number in this page to help trace the
vehicle back to you in the event it is stolen
and subsequently recovered.

SURNAME:................................................

NAME: .......................................................

ADDRESS: ................................................

...................................................................

TELEPHONE NO.: ....................................  

NOTE 

Recovered vehicles are often

traced back to the owner thanks to his/her
details recorded in the Owner's Manual.

APRum_ATLANT125#02_##uk.book  Page 38  Tuesday, March 14, 2006  5:15 PM

Summary of Contents for 500 Sprint

















































































Reviews:

No comments