Approach Engineering AH-64A APACHE SWIFT/LOGO 10, User Manual

Page: 35 / 45

23.25
The tail rotor gearbox mounts on the inner tube. Place
the tail rotor tube servo clamp over the outer tube in the vertical
fin. Install the flexible drive wire. Insert the inner tube so that
the driveshaft housing goes inside the alignment bushings.
Slide down until you get full engagement of the driveshaft with-
out binding the system. Using loctite tighten down the 6-32
screw to hold the tube in place.
23.26
Cover the tail rotor gearbox with the tail covers.
23.27
Put the transmission bay assembly and the canopy on
the fuselage and check again for proper fit and no interference
with the mechanics. Secure with #2 sheet metal screws through
the guide teeth.
23.28
Complete proper range checks and tests to ensure a safe
working condition and enjoy. It is recommended that you check
the security of all screws after the first few flights to make sure
that nothing is coming loose. Also check the tightness of the
tail rotor tube to make sure that it is not turning or sliding out.
If you have any questions please feel free to contact us at
www.approachengineering.com and also send us your com-
pleted model pictures so we can put them on our home page.
Thank you for your business and enjoy your flights.