Approach Engineering AH-64A APACHE SWIFT/LOGO 10, User Manual

Page: 29 / 45

APACHE-E SWIFT/LOGO10 PAGE # 29
DAWSON’S
APPROACH E GI EERI G
AH-64A ELECTRIC
22.1
Punch out the TADS/PNVS support plate, NS-S, from
the ¼ inch balsa sheet. Using the slot provided glue it to the
front of the TADS/NVS front plate so that it is perpendicular to
this plate.
22.2
Punch out the two triangular TADS/PNVS side supports,
TD-S, from 3/32” balsa. Glue in the notch made by the TADS/
PNVS support plate to the back plate.
22.3
Punch out the three PNVS optical assembly, PNVS -3,
from the ¼” balsa sheet. Glue the three pieces together.
22.4
Punch out the three PNVS optical assembly, PNVS -3,
from the ¼” balsa sheet. Glue the three pieces together.
22.5
Punch out three TADS night vision, TADS-1, from the
¼” balsa sheet. Using CA glue the three pieces on top of one
another.
22.6
Punch out three TADS day side optical assembly, TADS-
2, from the ¼” balsa sheet. Using CA glue the three pieces to-
gether on top of one another.
22.0 TADS A D P VS
ASSEMBLY