Setup
Document No. D113-015
Page 32 of 77
Revision 1.9
The import will create the following:
The required UDTs (user defined data types)
Controller tags representing the Input and Output assemblies.
A routine mapping the HART4In and HART4Out modules to the aforementioned tags.
The user may need to change the routine to map to the correct HART-4 module instance
name, and make sure that the mapping routine is called by the Program’s Main Routine.
Figure 3.34. - Imported RSLogix 5000 objects
Refer to the additional information section of this document for an example RSLogix 5000
project as well as the required UDTs.
