Setup
Document No. D113-015
Page 16 of 77
Revision 1.9
A Slate project will be created, showing the Project Explorer tree view. To save the project
use the Save option under the File menu. A new device can now be added by selecting Add
under the Device menu.
Figure 3.12. - Adding a new device
In the Add New Device window select the HART 4In or HART 4Out module and click the Ok
button. The configuration of the HART 4In and HART 4Out modules are almost identical and
the two modules will be referred to as the HART 4 module from here on.
Figure 3.13 – Selecting a new HART 4 module
The device will appear in the Project Explorer tree as shown below, and its configuration
