Setup
Document No. D113-015
Page 26 of 77
Revision 1.9
3.5.
MODULE DOWNLOAD
Once the HART 4 module configuration has been completed, it must be downloaded to the
module.
Before downloading the Connection Path of the module should be set. This path will
automatically default to the IP address of the module, as set in the module configuration. It
can however be modified, if the HART 4 module is not on a local network.
The Connection path can be set by right-clicking on the module and selecting the Connection
Path option.
Figure 3.22. - Selecting Connection Path
The new connection path can then be either entered manually or selected by means of the
Target Browser.
Figure 3.23. - Connection Path
To initiate the download, right-click on the module and select the Download option.
