Setup
Document No. D113-015
Page 22 of 77
Revision 1.9
The module supports the asynchronous reading of advanced diagnostic parameters, which
are then written directly to Logix tags. The Advanced Diagnostics configuration tab consists
of a table comprising the following parameters:
Parameter
Description
Description
A user description for the advanced diagnostic parameter.
Command
The command string used to collect the parameter.
(See Advanced Diagnostic Builder below.)
Data Type
The Logix tag data type required to accept the parameter.
Logix Tag
The Logix tag name mapped to receive the parameter.
Table 3.3 – Advanced Diagnostics parameters
The Advanced Diagnostic configuration is shown in the figure below. The IP Point HART
Advanced Diagnostic configuration window is opened by either double clicking on the module
in the tree or right-clicking the module and selecting Ch 0 -
Adv
.
Figure 3.18. – Advanced Diagnostic Configuration
To create a new Advanced Diagnostic item, select the Build button. The HART Advanced
Diagnostic Builder will open.
