SmartLine Management Software
5-19
messages appear to warn you of this condition. Proceed as
follows:
1. Select Edit Names from the File menu. Note that the Edit
SmartLine Module Names window appears (see Figure 5-9).
2. From the Addresses box, select (highlight) the address of the
device you wish to rename, and click the Edit button. Note that
this box always contains device addresses.
When you click Edit, the Name and Comment fields appear for
the device selected and their current entries. You can now make
any changes desired.
3. If you wish to change Name or Comment field entries for any
other devices, repeat step 2 for those selections.
4. If you want to return any device to its factory name, select the
device from the address field and click on the Delete button.
5. When you have made all the desired Name and Comment
changes desired, select each address again to make sure no two
devices have the same name. Then click on the Close button.
Figure 5-9. SmartLine Module Names Window.
