![Andreoli Engineering ATOM 1000 Operator'S Manual Download Page 85](http://html1.mh-extra.com/html/andreoli-engineering/atom-1000/atom-1000_operators-manual_2942479085.webp)
ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
85/166
Use only ultra low sulphur diesel fuel.
Low lubricity fuels (HFRR > 460
m) not admitted.
Fuel suitability for cold weather operations is necessary to ensure low pressure circuit and filtering system
functionality.
CFPP degree (Cold Filter Plugging Point) Diesel fuel characteristic, defined according EN590 standards, has
to be coherent with the prevailing geographical and climatic conditions.
The use of low quality Diesel fuel or other types of fuel and liquids causes serious damages to
the engine and fuel filters.
4.2.2
Starting the machine
Before starting the machine make sure that the main joystick is in neutral position and that the emergency
stop red button is released.
Also make sure that the main battery switch is on.
To start the machine turn on the ignition key on the steering column.
As soon as the engine starts, stop the electric starter.
Do not run the electric starter for more than 20 seconds to avoid damages to the starter.
Before starting to work with the machine is necessary to learn all controls and to read carefully
this manual to understand all working capabilities of the machines and possible dangers due to
improper use.
When running the machine it is mandatory to stay with the whole body inside the closed cab, sitting on the
seat, with safety belts on, to be protected against dangers and chemicals contamination.
Before getting out from the cab put the joystick to the neutral position to stop the machine, engage the
parking brake and turn off the engine waiting for the complete stop of all moving parts of the machines.
Remove the ignition key.
The safety of the driver and people near the machine depends on driver’s care, knowledge of controls and
prudence.
The machine must always be perfectly efficient before starting to work.
Any service or repair of the machine must be done using original spare parts.
Before starting the engine make sure that all commands are in neutral position or turned off.