ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
13/166
2.4
SAFETY INSTRUCTIONS BEFORE USING THE MACHINE
During the first period of life there is a general adjustement of the mechanical components and of the
hydraulic connections, therefore it is very important to accurately check the machine.
You must always evaluate possible risks associated to the use, in order to decide if the machine is correctly
equipped to ensure operator’s safety.
You must evaluate rollover risk, chemicals inhalation or contamination, etc.
Keep the machine clean, this will help you to better identify possible defects or breakages.
Always keep clean the entry step of the cab, the ladder, the controls. Remove mud and dust, avoid slippery
surfaces.
Do not keep tools on the machine which can cause damages to the machine or to the operator.
Make sure that all protection devices are properly fitted on the machine, replace immediately if needed.
Check all hydraulics piping. Replace if needed.
Do not use levers or piping as hooks. These components are not designed to act as hooks.
Make sure there are no leaks of fluids. Make sure all bolts are correctly tightened.
Make sure all scheduled service operations have been regularly done before using the machine.
Check the pressure of the tyres and inflate at the pressure level suitable for the type of tyres and the nature of
the ground.
The operator must have a good visibility of all the working area; keep cleaned all mirrors of the machine and
back mirrors.
Check the correct position of the seat and of the steering wheel.
2.5
SAFETY INSTRUCTIONS DURING THE USE OF THE MACHINE
Always use the machine according to relevant laws and regulations.
Enter/exit the cab using the steps and handles, to prevent falls.
Before starting the engine, make sure all controls are in neutral position.
Start the engine ONLY if you are sitting on the main seat. Keep seat belt fastened for all the time you run the
machine.
Warm-up the engine correctly (at low revs) before starting your job. Warm-up is particularly requested
during runnin-in and in cold conditions.
Immediately stop the machine and the engine if you recognize failures or strange noise and vibrations.
Start the engine again ONLY after having solved the problem.
Make sure that the visibility from the seat is always good enough to see presence of people or other types od
risks.
The machine is normally used during the day; if you use the machine during the night, use the work lights
supplied or an extra lighting system.
