ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
22/166
Check all components and replace if necessary.
Check the tightening of fixing screws of main components.
Let the engine cool and empty fuel tank.
Empty fuel tank only in a well ventilated place to avoid explosion or fire risks.
To protect the engine, it is mandatory to start the engine every month. Let the engine run for
some minutes (minimum 5 minutes) at low revs.
2.14
SAFETY INSTRUCTIONS FOR MAINTENANCE
Warranty is not valid if you do not follow prescribed scheduled service operations indicated on this manual,
on the engine manual and chemicals pump manual.
Service operations must be performed by authorized technical staff according to the procedures prescribed
by the Manufacturer.
Always follow prescribed scheduled service operations according to the indications of the Manufacturer.
Always check the scheduled maintenance program, do NOT use the machine if you have not respected the
scheduled maintenance program.
Keep constantly clean main components of the machine (engine, battery, fuel tank, etc.), to avoid fire risks
due to dust and particles accumulation.
Normal set-up and service of the machine must be done by qualified and expertise staff only.
All set-up and service operations must be done with adequate tools and safety devices, following safety rules
according to relevant laws of your country.
Perform set-up and service operations ONLY when engine is stopped, machine is stopped with park brake
engaged and in safety conditions.
Make sure engine and components near the engine are cold before performing set-up and service operations,
to avoid burn risk.
Replace worn components and safety components ONLY with original parts or with parts having same
technical features.
The Manufacturer has no responsibility and warranty is not valid if the machine is used with non-original
parts or parts with different features.
Always use lubricants (oils and grease), refrigerating gas and refrigerating liquids recommended by the
Manufacturer.
