ANDREOLI
ENGINEERING
Operator’s Manual
Self-propelled sprayer ATOM
104/166
it is strictly forbidden to enter inside the chemicals tank for any type of service;
check every day piping and fittings conditions. Replace them if any type of wear appear;
check periodically the tightening torque of all nuts;
before servicing the chemicals tank it is necessary to empty the whole circuit;
check every day nozzles conditions. Replace them if any type of wear appears.
All services and periodic checks must be done following the correct time and working hours
intervals.
Service operations must be performed by authorized staff, following the procedures indicated by the
Manufacturer.
If check and service time intervals are not correctly respected, anomalous wearing and damages
may occur to the machine.
Service and check frequency must be increased in case of heavy duty working conditions.
Warranty is not valid if the scheduled service operations are not correctly respected.
It is mandatory to:
respect the operating limits described by the Manufacturer;
do not modify the machine without the permission of the Manufacturer;
follow accurately all scheduled services;
always use original spare parts;
make sure that all people working with the machine have all technical knowledge and
psychophysical qualifications.
The warranty will not be applied by the Manufacturer if the above conditions are not completely
satisfied.
The use of non original spare parts (not approved by the Manufacturer), the safety protection
removal, and the lack of maintenance invalidate warranty terms. In this case the Manufacturer and
the local authorized Dealer are not responsible for malfunctions and injuries.
