SHOW SETTINGS
Screen setup
For the
ORCHESTRA
to pilote external devices, they must be
set up as Screens. To setup a Screen, do the following :
1/ Select the next available screen (1-6) in the Screen section of
the
ORCHESTRA
. The Screen button will light up yellow, and a
display of your empty screen will appear on the
ORCHESTRA
tactile screen.
2/ On the
ORCHESTRA
tactile screen, press
Screen Setup
to
enter the Screen configuration page, then press
Edit
if you wish
to give your Screen a different name than the default name
(Screen 1-6). Change the name of your Screen accordingly,
and press the OK button to validate and return to the
Screen
Setup
page.
Edit devices
To add a device into a Screen, activate it, and start piloting it,
do the following :
1/ In the
Type
dropdown menu on the tactile screen, select the
kind of device you want to use in your Screen (in this case a
Di-VentiX II
).
2/ In the
Mode
dropdown menu on the tactile screen, select the
mode you want to use the device in (in this case Mixer Mode).
* NOTE * : Screen parameters other than
Edit Devices
will not
be available until a device is stored into a Screen and activated.
3/ Press
Edit Devices
, and press
Add
, the tactile screen will
display a page which will let you choose the device you want
the
ORCHESTRA
to pilote. Press
Edit
to give the device a
different name than the default name, select the communication
protocol the device is configured in, and change LAN settings
if need be.
* NOTE * : make sure LAN settings match those of your device.
* NOTE * : only TCP and UDP protocols are supported on the
ORCHESTRA
. We recommend sticking to the TCP protocol.
20
