WORKING WITH A MATRIX
Matrix setup
If you are working with a matrix in your setup, you must add it
into your show. To do so, follow these few steps :
1/ On the
ORCHESTRA
show page, press
Matrix Setup
to
enter the
Matrices
page.
2/ Press
Add
, then press
Edit
if you wish to rename your matrix.
3/ From the
Type
dropdown menu, select the type of matrix you
are using.
4/ Select the connection protocol in the
Connection
panel (we
recommend sticking to TCP).
5/ Press
LAN settings
to enter the
LAN settings
page, and
configure the LAN settings accordingly.
* TIP * : please be sure your LAN settings correspond to those
of your matrix device.
6/ Press the OK button to come back to the
Matrices
page,
which should now display the matrix you just configured.
7/ Press the OK button again to return to the
ORCHESTRA
show page.
Matrix configuration
Once the matrix has been added, you must add the slave
device to a Screen.
1/ Select the Screen you wish to work in, and press
Screen
Setup
.
2/ Press
Edit
if you wish to rename the Screen, and choose the
slave device type from the
Type
dropdown menu.
3/ Press
Edit Devices
, then press
Add
on the
Device Setup
page.
4/ Press Edit if you wish to rename your device, then select the
connection protocol for the device.
38
