19
Show configuration
For the
ORCHESTRA
to start piloting your external device(s),
you must create a show to work in. The show will hold
parameters for any connected device (as well as all other show
parameters such as inputs, outputs, screens, presets...).
1/ Press the
Shows
button on the TFT screen, then press
Create a New Show
.
2/ The
ORCHESTRA
will display the
Show Edit
screen, which
allows you to name the new show according to your wishes.
When you have chosen a show name, press the OK button to
validate your choice. The
ORCHESTRA
will display a blank
show page.
To configure keyboard brightness and parameter the
joystick :
1/ Press the
Keyboard
tab on the System Configuration page.
2/ Rotate the corresponding knob to increase/decrease
keyboard luminosity.
3/ Wriggle and turn the joystick, then let it return to its initial
position. If need be, press the Calibrate button which will adjust
the neutral position of the joystick precisely.
To set the time on the the ORCHESTRA :
1/ Press the
Time
tab on the System Configuration page.
2/ Change the time accordingly, by pressing the +/- buttons on
the onscreen clock.
To check and update firmware version of the ORCHESTRA:
1/ Press the
Update
tab on the System Configuration page.
2/ You can update the software by plugging a USB key with
an up to date version of the software on the front panel of the
ORCHESTRA
. Press
Refresh
to list available update files on
the USB key and select the desired update from the list then
press
Update
. The
ORCHESTRA
will display a message while
it loads the new sofware.
* IMPORTANT * : do not remove the USB key during the update
process is in progress.
