Image Settings
The
Image Settings
page allows to fine tune the source image
of any input you have previously entered into your Screen. This
menu is accessible when working directly with live sources
on the
ORCHESTRA
front panel (for more detail on
Image
Settings
, please refer to the Layer Settings chapter, p.28).
1/ In the
Screen Setup
page of the
ORCHESTRA
, press
Image
Settings.
The
Image Settings
page will give access to different
settings depending on whether the selected source is a digital
or an analog source.
2/ Select the source you wish to work on. Buttons in the
Source Preview section will light up, indicating the sources are
available.
2/ Select the
Adjust, Position/Size, Pulldown, Aspect Ratio,
Zoom or Keying
tabs to adjust those settings of your source
image by rotating the corresponding knob, then sliding values
up or down to fine tune your source.
3/ When you are satisfied with your image settings, press the
OK button to return to the Screen Setup page.
Logos & Frames
The
Logos/Frames
page allows users to capture and store
logos and frames (see also Frame Background, p. 29).
1/ In the
Screen Setup
page of the
ORCHESTRA
, press
Logos/
Frames.
The buttons in the Source Preview section of the
ORCHESTRA
will light up, allowing you to display the source
you wish to capture. The buttons in the Layout section and the
Settings section will also light up, and give you access to your
logo or frame parameters.
2/ Select the source you wish to capture by pressing a Source
Preview button (1-8), then select the
Record Logo
tab if you
wish to record a logo, or the
Record Frame
tab if you wish to
record a frame. In this case, we will see how to record a logo.
A white rectangle will appear on screen to indicate the area to
capture as a logo.
3/ Select the memory you wish to store the logo/frame into (1-8)
in the
Memory Slot
dropdown menu.
24
