STARTING WITH THE ORCHESTRA
User configuration
When the
ORCHESTRA
starts up, the
User
page will be
displayed over the
Home
page. Here, you can determine
whether to create a new user to work as, or use an already
existing one. The first time you use the
ORCHESTRA
, you will
have to create a new user.
1/ Press the
New User
button on the TFT screen.
2/ The
ORCHESTRA
will display the
User Edit
screen, which
allows you to name the new user according to your wishes.
When you have chosen a user name, press the OK button
to validate your choice. Press OK again if you do not wish to
create a password for the new user. Otherwise, enter a user
password which will be asked every time you wish to log in as
that user.
3/ On the
User
page, choose the user you have just created,
and press the OK button again. The
ORCHESTRA
will display
its home page.
System configuration
OPERATIONAL CONFIGURATION
The
ORCHESTRA
System Configuration page allows you to
parameter the IP address of the
ORCHESTRA
, caliber the
joystick, the keyboard luminosity of the machine, set the time,
or check the software version and update it via the USB port if
need be.
1/ Press the
System
button on the TFT screen. The
ORCHESTRA
will display the network configuration page of
the
System
menu.
2/ Rotate the corresponding knobs to change the IP address
of the
ORCHESTRA
(IP1, IP2, IP3, IP4) then press the OK
button to validate. A message will appear asking for you to wait
while the
ORCHESTRA
registers the new address, and asks
to reboot. Press
Yes
, and wait for reboot.
* NOTE * : the
ORCHESTRA
must be in the same network as
the devices it is going to control.
18
