65
USER MANUAL
Output group pattern
In
Outputs
, select an output. In
Group Pattern
, the following settings are displayed:
Note:
Output pattern settings are identical for all outputs of the same group.
Setting name
Description / Setting selection
Patterns
Enable
On/Off toggle. Display the pattern in all outputs of the group
Patterns
Select the pattern to display
Area
Set the pattern to fit the format used or the AOI
Raw Colors
On/Off toggle. Using raw colors disables all
Adjustments
settings (ex: Colorimetry,
User Gain, etc.)
Setting name
Description / Setting selection
Raster Box
Format
Click to enable raster box on whole format
AOI
Click to enable raster box on AOI
Note:
For more information on pattern types, see
Output signal
In
Outputs
, select an output. In
Signal
, the following settings are displayed:
Setting name
Description / Setting selection
Settings
Color Space
Auto
or
RGB
(Full or Limited),
YCbCr
(
4:4:4
,
4:2:2
or
4:2:0
) and
ITU-R BT.
(
709
or
2020
)
Color Depth
8 bits
,
10 bits
or
12 bits
SDI 3G Standard
Level A
or
Level B
(SDI output only)
DVI mode
Enable to change signal into DVI signal if using a DVI connector on the display
DDC Bus Speed
Slow
,
Medium
or
Fast
(HDMI only)
HDCP
Disable*
;
Auto
;
HDCP 1.x
; or
HDCP 2.x
*Disabling HDCP reduces possible problems when the content is not fully HDCP compliant. When output HDCP is disabled, HDCP-
protected inputs are not displayed.
Recommendation:
Always use high quality cables to prevent connection and bandwidth errors when using HDCP.
Note
: DDC Bus Speed is set to
Fast
by default.
Using
Slow
or
Medium
speed can be needed to resolve compatibility issue when using HDMI over fiber extenders.
Summary of Contents for AQL-C
Page 121: ...www analogway com 121 USER MANUAL...
