54
USER MANUAL
Patterns
Display patterns are used during the Screen configuration phase to test and control how outputs are
displayed in Screens. Use patterns to identify and test that the displays are set correctly (color, position,
resolution, etc.). Enabling a pattern overrides any content displayed in the output. It is possible to use Screen
patterns and Output patterns.
Tip:
Make sure to keep all patterns disabled when they are not needed.
Note:
Screen patterns are displayed on top of Output patterns.
Fig. 15 -
Screen patterns / Output patterns
7.4.3.1
Screen pattern
Use Screen patterns to apply one pattern on the entire screen.
Setting name
Description / Setting selection
Patterns
Enable
On/Off toggle. Display the pattern in the Screen
Patterns
Select the pattern to display
Tip:
- Make sure to keep all patterns disabled when they are not needed.
- The pattern
Geometric
is fully customizable to adapt to any screen.
- The patterns
Grid Custom
,
Crosshatch
and
Checkerboard
are customizable patterns with units in pixels.
7.4.3.2
Output pattern
Use Output patterns to test and control how outputs are displayed in Screens.
Setting name
Description / Setting selection
Patterns
Enable
On/Off toggle. Display the pattern in output
Patterns
Select the pattern to display
Area
Set the pattern to fit the format used or the AOI
Raw Colors
On/Off toggle. Using raw colors disables all
Adjustments
settings (ex: Colorimetry,
User Gain, etc.)
Raster Box
Format
Click to enable raster box on whole format
AOI
Click to enable raster box on AOI
Tip:
- Remember to enable and disable patterns on all outputs.
- The patterns
Grid Custom
,
Crosshatch
and
Checkerboard
are customizable patterns with units in pixels.
Summary of Contents for AQL-C
Page 121: ...www analogway com 121 USER MANUAL...
