![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921053.webp)
Tuner Modules
41
Tango / Mi-Series Audio Controllers
Setting the Jumpers
Mi-Series and Tango Audio Controllers come equipped with one DAS-AMFM Tuner Module, installed into
Slot 2 (see FIG. 57). Mi-Series and Tango Audio Controllers support 2 Tuner Modules in any combination,
this document describes installing the DAS-AMFM Tuner Module into Slot 1, leaving the factory-installed
DAS-AMFM Tuner Module in Slot 2.
Audio Controller Jumpers - Location
Examine the configuration of the jumpers on the left-side Rear-Board Pin Bus, as seen when viewing the rear
board from the front of the Controller (FIG. 58).
Audio Controller Jumpers - ON/OFF Settings
ON position = pins 3 and 2 jumpered (with pin 1 exposed).
OFF position = pins 2 and 1 jumpered (with pin 3 exposed).
Because of the location of the Jumpers in the Controller and on the Tuner Module, it
may be easier to make all jumper settings before installing the Tuner Module in the
Controller.
FIG. 58
Audio Controller - Rear-Board Pin Bus / Jumpers
FIG. 59
Controller Jumper Settings
Audio Controller Jumpers
rear panel
Rear-Board Pin Bus -
Slot 1 (with faceplate installed)
Slot 2 (with AM/FM Tuner module installed)
(see Fig 4 & 5)
3
1
3
1
Jumper (pins 3-2)
exposed pin (1)
Jumper (pins 3-2)
Jumper (pins 2-1)
exposed pin (3)
Jumper (pins 2-1)
ON
position
(Jumper pin
1 & 2
)
OFF
position
(Jumper pins
2 & 1
)
exposed pin (1)
exposed pin (3)
Summary of Contents for Tango DAS-T0804-SIG
