![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921031.webp)
Installation
19
Tango Series Audio Controllers
Direct Numeric Access
Tuners
Enter the station identification and press ENTER.
Strings of 3 to 4 numbers are recognized.
If a " • " (dot) is part of the string, then an FM station is assumed, otherwise an AM station is
assumed.
Example:
1050 + ENTER= 1050AM, 104 • 5 + ENTER = 104.5FM
CD Player / Changer
To select a specific Disc & Track
, the format is DDD • TTT + ENTER
(DDD=Disc, TTT=Track).
Example
: 11.11 + ENTER = Disc 11, Track 11
To select a specific track on the current disk
, enter TTT + ENTER (TTT=Track).
Example
: 3 + ENTER = current disk, Track 3
Satellite Radio/Video
Enter the station number and press ENTER. Strings of 2 - 4 numbers are recognized.
Configuration Mode
The configuration mode allows you to set various device features (IR Transmit Mode, Timeout Adjustment,
Download Mode, Debug Mode, Battery Type, LED Awake Brightness, and LED Sleep Brightness.
To enter Configuration Mode:
1.
Press and hold button #38 and the "." (dot) or button #26 (see FIG. 13). Both buttons must be pressed
within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in
configuration mode.
2.
Press button #3 (FAV) when you are finished.
IR Transmit Mode
Pressing button
1
toggles the IR transmission mode between 38KHz (default) and 455KHz. The display
indicates the current mode.
Timeout Adjustment
Press button
2
to change the sleep timeout from the default. Each time "2" is pressed, the sleep timeout raises
incrementally. The pre-determined sleep timeouts are:3 seconds, 6 seconds, 9 seconds, and 12 seconds. The
display indicates the selected sleep timeout.
Download Mode
Pressing button
3
toggles the Download mode OFF and ON. The Download mode must be ON before you can
download a file to the MIO R-1 AUDIO device. While the Download mode is ON the device will not go to
sleep. A power cycle will return the device to Download OFF.
Debug Mode
Pressing button
4
toggles development mode between ON and OFF. The display indicates the selected mode.
In development mode, the display shows the IR code assigned to buttons when pressed.
This mode is useful to the programmer when determining what IR codes are associated to each mode.
Your settings will not be lost in the event your batteries die or are removed.
Metreau MET-6N keypads support 38KHz only. The MIO R-1 AUDIO must be set to
38KHz if used with MET-6N keypads.
Summary of Contents for Tango DAS-T0804-SIG
