AMX Tango DAS-T0804-SIG, Operation/Reference Manual, Page: 63 / 102

AMX Duet Module Interface Specifications
51 Mi-Series & Tango Audio Controllers
Levels
The UI module controls the Tango Controllers via level events (NetLinx command SEND_LEVEL) sent to the
COMM module.

The levels supported by the COMM module are listed below.

These levels are associated with the virtual device(s) and are independent of the levels associated
with the touch panel device.

An '*' indicates an extension to the standard API.
Command Control
The UI module controls the Tango Controllers via command events (NetLinx command SEND_COMMAND)
sent to the COMM module.

The commands supported by the COMM module are listed below.

Not all sources will work with all the commands listed below. Depending on how the device is
programmed each source has it's own set of applicable commands/channels (see the
Input Source
Types section on page 56).
Mi-Series & Tango Controllers - Levels
Level Description
1 Volume Level (range 0…255)
2 Balance Level (range 0…255)
3 Bass Level (range 0…255)
4 Treble Level (range 0…255)
*8 Page Volume Level (range 0…255)
Mi-Series & Tango Controllers - Command Control
Command Description
?BAND Get the currently selected tuner band.
This query should be issued on the port matching the source number you want to
query.
Syntax:
?BAND
Replies with
BAND-<band>
Example:
?BAND
?DEBUG Request the state of the module debug feature.
Syntax:
?DEBUG
This query should be issued on port 1.
Replies with
DEBUG-<value>
Example:
?DEBUG
DEBUG Set the state of debugging messages in the module.
Syntax:
DEBUG-<value>
This command should be issued on port 1.
<value>:
• 1 = set only error messages on
• 2 = set error and warning messages on
• 3 = set error, warning & info messages on
• 4 = set all messages on
Example:
DEBUG-1