![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921027.webp)
Installation
15
Tango Series Audio Controllers
Installing Custom Buttons
1.
Flip and turn the MIO R-1 AUDIO so that the buttons are facing away from you and the device is upside
down.
2.
Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery
door free.
3.
Unscrew the 6 screw points indicated in FIG. 14.
4.
Turn the unit over so the buttons are facing you.
5.
Lift the top assembly away from the PCB.
6.
If necessary, push out the standard buttons from the front of the top assembly.
7.
Drop on your custom button pad and verify the alignment with the guide posts on the PCB.
8.
Place the top assembly back down on the PCB and return the unit over, exposing the 6 screw points.
9.
Tighten the 6 screw points.
10.
Place the battery door back on the device, slide to lock it in place.
MIO R-1 AUDIO Specifications (Cont.)
Transmission Range
(distance) with MIO IR
Receiver
• 100 feet at 38KHz
• 50 feet at 455KHz
Transmission Range
(angle)
• 140 degrees (+/-70° from perpendicular) horizontally from an axis extending
from the end of the remote.
• 40 degrees (+/-20° from perpendicular) vertically from an axis extending from
the end of the remote.
Top Components
• LED - blue backlit buttons indicate device is awake
• Display (OLED) - 128 x 32 pixels, active area is 29.42mm x 7.98mm
• Pushbuttons - the power button is red backlit; the rest are blue backlit buttons.
45 buttons; 9 custom buttons (3 macro and 6 device).
Rear Component
• Programming Port - 2.5 mm stereo female conductor jack
• Battery Door
Dimensions (HWD)
9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)
Weight
• .45 lbs (20 kg) without batteries
• .55 lbs (25 kg) with batteries
Operating Environment:
• Operating Temperature: 0° to 50° C (32° to 122° F)
• Storage Temperature: -10° to 70° C (14° to 158° F)
Included Accessories:
• 4 AAA Batteries
Other AMX Equipment
• DB-9 extension cable (
FG10-727
)
• Programming Cable - a 3 wire, 2.5 mm stereo jack (
FG10-817
)
• Custom engraving (
FG147-01
)
• MIO-RCC Kit (
FG147-03K
)
• MIO-RCC Charging Base (
FG147-02
)
• MIO-RBP Rechargeable Lithium Ion Battery (
FG147-10
)
• MIO Modero IR Receiver (
FG5797-01xx
; xx indicates color)
Summary of Contents for Tango DAS-T0804-SIG
