![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921075.webp)
Serial Control Strings
63
Mi Series and Tango Audio Controllers
Command Messages (Cont.)
AMX
AMX Beacon Poll
(
Note: v7 or higher only
)
AMX Beacon Response:
AMXB <-UUID=v> <-SDKClass=w>
<-Make=x><-Model=y> <-Revision=z>
where:
1) ’v' = 'MATRIX-CTRL'
2) 'w' is 'DCTRL'
3) 'x' is 'AMX'
4) 'y' is 'MI-4', 'MI-6', OR 'MI-8' depending on
controller hardware
5) 'z' denotes the current firmware version
- or -
ERR
MGBD
Get Baud Rate
(
Note: v7 or higher only
)
Baud Rate Status:
"BAUDxxxx"
where:
'xxxx' is the current Baud Rate.
- or -
ERR
BDHI
Set Baud Rate to 9600
(
Note: v7 or higher only
)
Baud Rate Status:
"BAUDxxxx"
where:
'xxxx' is the current Baud Rate.
- or -
ERR
BDLO
Set Baud Rate to 4800
(
Note: v7 or higher only
)
Baud Rate Status:
"BAUDxxxx"
where:
'xxxx' is the current Baud Rate.
- or -
ERR
MSVLr,v
Set Volume, where:
1) 'r' is the desired room, (1-64)
2) 'v' is the desired volume level, (0-20):
101: Mute
0..70: 0..-70 dB
Volume Status:
"MVLr,v"
where:
1) 'r' denotes the room(1-64)
2) 'v' denotes the volume setting:
101 : Mute
0..100: 0..-100 dB
- or -
ERR
MGVLr
Get Volume, where:
'r' is the desired room, (1-64)
Volume Status:
"MVLr,v"
where:
1) 'r' denotes the room (1-64)
2) 'v' denotes the volume setting:
101: Mute
0..100 : 0..-100 dB
- or -
ERR
Summary of Contents for Tango DAS-T0804-SIG
