![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921025.webp)
Installation
13
Tango Series Audio Controllers
Connecting a Tango Amplifier
Tango Amplifiers provide extra output power for up to 4 additional speaker pairs driven from one zone.
The
DAS-TAMP4-SIG
Tango 4-Channel Amplifier (FG1103-21) is a 4-channel amp that supports
an additional 2 speaker pairs per unit.
The
DAS-TAMP8-SIG
Tango 8-Channel Amplifier (FG1103-22) is an 8-channel amp that
supports an additional 4 speakers pairs per unit.
Connect the Tango Amplifier to the Audio Controller via the 4-pin connector labelled “
From Controller
” on
the rear panel of the Controller. FIG. 12 illustrates the connections between the Tango Audio Controller and
Amplifier:
Refer to the Tango 4/8 Channel Amplifiers Installation Guide for details.
FIG. 12
Wiring Diagram
Tango Audio Controller
Tango Amplifier
DAS-MET-6SRC
Summary of Contents for Tango DAS-T0804-SIG
