![background image](http://html1.mh-extra.com/html/amx/tango-das-t0804-sig/tango-das-t0804-sig_operation-reference-manual_2937921049.webp)
Setup and Configuration
37
Tango Series Audio Controllers
2.
The following screen is displayed (FIG. 51):
3.
Select
MRC
to view the software version of the Main Controller and keypads. The following screen is
displayed (FIG. 52):
Select
Quit
to return to the
About
screen, where another unit can be selected.
Select
Main Keypads
to view the software version of the Main Keypads. The following screen is
displayed (FIG. 53):
“
OK
” returns you to the
About MRC
screen.
Program LCD KP
Select
Program LCD KP
to display the
Reprogram LCD Keypad
screen (FIG. 54).
This option puts the Controller in the correct mode to allow LCD Keypads to be programmed. The
communication on the I2C bus will be stopped so that the programming of the LCD keypads is not interrupted.
Once the LCD KP has been programmed, select
QUIT
to exit the screen. Communication on the I2C bus will
resume.
FIG. 50
System Setup Mode - About
FIG. 51
About - Make a Selection
FIG. 52
About MRC #
FIG. 53
MRC Main Keypads
FIG. 54
Reprogram LCD Keypad screen
Summary of Contents for Tango DAS-T0804-SIG
