AMX Tango DAS-T0804-SIG, Operation/Reference Manual, Page: 86 / 102

Serial Control Strings
74 Mi Series and Tango Audio Controllers
Command Messages (Cont.)
MGFVr,s Get the favorite, where:
1) ‘r’ is the desired room, (1-64)
2) ‘s’ is the desired source, valid values are
1-8
Favorite Status:
"MFAVr,s,f"
where:
1) 'r' is the room, values from [1..64]
2) 's' is the source, values are 1-8
3) 'f' is the direct tuning string; it can be from
0 to 7 characters long and is translated
as specified in the 'Send Source Direct
Data' command: Zero length data is
returned if the favorite is not set
- or -
ERR
MSLOr Lock out the keypad in a room, where:
‘r’ is the room to lock out, (1-64)
Keypad Lock Out Status:
"MLOTb8,b7,b6,b5,b4,b3,b2,b1"
where:
'b8'…'b1' is a binary room selection bitmap
where all rooms blocked out have a binary 1 in
the room position. The most significant bit in
'b8' is for room 64 and the least
significant bit in 'b1' is for room 1
- or -
ERR
MCLOr Clear the keypad lock out in a room, where:
‘r’ is the room to clear the lock out in, (1-64)
Keypad Lock Out Status:
"MLOTb8,b7,b6,b5,b4,b3,b2,b1"
where:
'b8'…'b1' is a binary room selection bitmap
where all rooms blocked out have a binary 1 in
the room position. The most significant bit in
'b8' is for room 64 and the least
significant bit in 'b1' is for room 1
- or -
ERR
MGLO Get the keypad lock out status for the sys-
tem. Keypad Lock Out Status:
"MLOTb8,b7,b6,b5,b4,b3,b2,b1"
where:
'b8'…'b1' is a binary room selection bitmap
where all rooms blocked out have a binary 1 in
the room position. The most significant bit in
'b8' is for room 64 and the least
significant bit in 'b1' is for room 1
- or -
ERR
MSPSs,n,p Set the preset, where:
1) ‘s’ is the desired source, (1-8)
2) ‘n’ is the desired preset, (1-10)
3) ‘p’ is the direct tuning string; it can be from
0 to 7 characters long and is translated as
specified in the ‘Send Source Direct Data’
command: Zero length data will clear the
preset.
Preset Status:
"MPRSs,n,p"
where:
1) 's' is the source, valid values are 1-8
2) 'n' is the preset, valid values are 1-10
3) 'p' is the direct tuning string; it can be
from 0 to 7 characters long and is
translated as specified in the 'Send
Source Direct Data' command: Zero
length data is returned if no preset is set.
- or -
ERR