Page 53
EVACU ELITE
INSTALLATION, COMMISSIONING AND USER MANUAL
The following explains the content of the screen
Display the previous module in the node
Display the next module in the node
Display the status of the handsets – handsets are currently displayed as the icon is
highlighted
Press to display the inputs. Each handset supports one input
Press to display the status of the loop outputs. Four outputs are support – Port 1 - loop 1
out, Port 2 - loop 1 in, Port 3 - loop 2 out and Port 4 - loop 2 in
Figure 6-20 Dual loop EIS line card status
Above is the module type “LILC” Loop Intercom Line Card, Location is Node 1, Rack 1, Slot 16, Software
Version 01.00.04 and hardware version 15.15.255, status is normal.
Figure 6-21 Handset status
Above is the address of WIP handset – Loop 1 (of 2), Address is 01 (of 20) – on the loop, reference WIP
handset number is 8, assigned descriptor, state is ON HOOK, status is normal, and the software version is
01.00.03 and hardware version (in blue) is 15.08.003
Figure 6-22 Dual loop EIS line card input status screen
