Page 59
EVACU ELITE
INSTALLATION, COMMISSIONING AND USER MANUAL
Figure 6-33 Battery status
Figure 6-33 details the status of the connected batteries, detailing size, voltage, temperature, charge level,
charge current and lead resistance.
6.4 Zones
To access the Zones screen, the following controls are activated
1 Menu control
2 Zone control
3
Zones Screen
Shows a list of zones configured in
the system.
If there are any faults on a node,
there will be
in the
column.
Activate the
control for detail
on the zone.
4
Individual Zone Screen
Shows the status and configuration
of the zone
The
control is used to disable
/ enable the zone.
The
control is used to turn on
and off the test tone for the zone.
The volume of the test tone is set by
the associated slider control.
The
control is use to enable a
delay on the zone entering the
emergency warning condition. The
duration of the delay is set by the
slider control. Refer to section
5.4.3.1 for further detail on delays
