Page 60
EVACU ELITE
INSTALLATION, COMMISSIONING AND USER MANUAL
The
control allows the zone
descriptor to be changed.
There are two zone descriptors – a short and long. The short descriptor is displayed above the Status and
Test Tone fields and is used in the individual EWS controls and indicators. Refer to section 5.1.12.
The long descriptor is displayed in the logs.
To edit the short and long descriptor, activate the
, (you will be prompted for access level 3 user ID and
password), then activate the
again. A keyboard will appear to allow the descriptors to be edited.
6.5 WIPs
To access the WIP screen, the following controls are activated
1 Menu control
2 WIP control
3
WIP Screen
Shows a list of WIP handsets
configured in the system.
If there are any faults on WIP node,
there will be a
in the
column.
The
control allows the WIP
handset descriptor to be changed.
The
column gives the
physical location of the handset
connection to the system, Node
Rack Slot input
There are two WIP handset descriptors – a short and long. The short descriptor is used in the individual EIS
controls and indicators. Refer to section 5.1.13.
The long descriptor is displayed in the logs.
To edit the short and long descriptor, activate the
, (you will be prompted for access level 3 user ID and
password), then activate the
again. A keyboard will appear to allow the descriptors to be edited.
