Ammann ASC 200 Series, Operating Manual

Page: 89 / 198

89 ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
2.7.2. Travel and reversing without
vibrations
•
Turn off gear selector 2 to set the working gear mode.
•
Select appropriate range of working gear on the work-
ing gear pre-selector 3.
•
Switch off the switch 15 IDLE. Using the selector 8, set
the required engine speed (e.g. 1,800.min
–1
(RPM)).
•
Check whether vibration is not on - the signal lamp 28
must not be on; use switch 6 to turn it off.
•
Release brakes of the machine with a switch 4. Signal
lamp will go off.
Give the acoustic signal before
starting driving the machine
and wait for period sufficiently
long for all persons being able
to leave the area around the machine
(area under the machine) in time!
Make sure that the area in front and in
the back of the machine is free and that
no persons are present in this area!