45
ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
2.1.4.
Forbidden actions
It is not permitted to
•
operate the machine under the influence of alcohol or
drugs
•
use the machine while its technical condition, person-
al safety (lives or health), property, or public roads
traffic would be endangered,
•
operate the machine while other people would be in
the vicinity, except during instructions by a teacher,
•
operate the machine, if some of its safety equipment
has been removed or damaged, like emergency brake,
hydraulic locks, etc.
•
travel and compact on slopes that could lead to the
instability of the machine (tipping over). The stated
static stability is lowered by the dynamic effect of
travel.
•
travel and compact on slopes where the ground could
slide with the machine, or the lack of adhesion could
initiate an uncontrolled skid.
•
operate the machine contrary to Operating instruc-
tions.
•
travel and compact with vibration adjusted to ground
firmness near edges of slopes and excavations to
cause danger of slides with the machine,
•
travel and compact with vibration on at a distance from
walls, cuts, and slopes that could cause danger of
landslides over the machine,
•
compact with vibration on at a distance from buildings
and constructions that could cause damage through
vibration effects
•
transport people on the machine,
•
operate the machine unless the driver’s station is
firmly anchored
•
operate the machine with open hood
•
operate the machine with other machinery or vehicles
near by, except those that are participating in the
operation,
•
operate the machine at a site, which cannot be sur-
veyed by the driver and where people or property could
be endangered, unless work safety is secured by
other means, such as signalization by another prop-
erly instructed person,
•
operate the machine near electrical wires or trans-
former stations,
•
travel over electrical cables, unless properly protect-
ed against mechanical damage,
•
operate the machine in deteriorated visibility and at
night, unless the site and the machine are sufficiently
illuminated,
•
leave the seat with the machine running
•
leave the machine unsecured, unless secured against
m i s u s e
•
eliminate safety and protection devices, fusing, or
change their settings,
•
use the machine with oil, fuel, cooling or other fluids
leaking
•
start the engine contrary to the Operating instructions
•
place other things on the driver’s platform except for
personal belongings,
•
deposit material and other items on the machine,
•
remove dirt while the machine is running,
•
maintain, clean, or repair unless the machine is se-
cured against involuntary movement or starting, and
the worker’s contact with moving parts is not prevent-
ed,
•
touch moving parts of the machine bodily or by hand
holding tools,
•
smoke and handle open flame during inspection and
tanking fuel, changing or adding oil, lubrication, check-
ing and topping battery,
•
carry on the machine – in the cabin or under the hood
–rags soaked in flammable fluids and flammable
fluids in open cans,
•
leave the engine running in closed rooms. Exhaust
fumes are deadly.
Applicable standards and regulations
ISO 6749
ISO 4510
ISO 8152
Summary of Contents for ASC 200 Series
