Ammann ASC 200 Series, Operating Manual

Page: 44 / 198

44 ASC110/ASC130/ASC150/ASC200/ASC250
2.1. Safety Regulations
•
Following the warning signal the operator may start
the machine first after all personnel have left the
vicinity of the machine. On a difficult to oversee site the
machine may be started after a certain time allowed
for vacating it.
•
The driver must follow safety regulations, not perform
actions affecting work safety, and fully attend work on
hand.
•
He must have regard for the work process and/or
instructions given by the supervisor.
•
The speed of the machine must be adjusted to the
condition of the grounds, the operation, and the weath-
er, and the site must be observed to avoid meeting an
obstacle.
•
When the operator leaves the machine unattended at
the end of an operation or its interruption, he must
secure the machine against unauthorized use and
incidental startup by removing ignition key, locking the
cabin door, and switching off electrical circuits.
•
After the operation has been finished, the machine
must be parked on a flat and firm ground in a stable
position off public roads and out of reach of falling
objects (soil) and natural dangers like floods, land-
slides, etc.
•
When the machine is parked on public roads, it must
be done according to regulations applicable to public
roads. The machine must be provided with proper
signs.
•
Following operations the machine’s defects and re-
pairs must be recorded in the operations diary. The
driver of the next shift must be made aware of existing
situation.
•
The driver must use personal protective means –
dress and shoes. The dress may not be too loose and
torn; hair must be protected by a suitable head cover-
ing. Hands must be protected by suitable gloves for
maintenance (lubrication, handling fluids).
•
The driver must wear headsets effective against noise
levels of 90 dB on a machine without cabin.
•
He must keep accessories as prescribed.
•
He must keep his station, steps and stepping points
clean.
•
Before lifting the cabin or hood, he must check for free
space and electrical wiring in the area, and make sure
that nobody is in danger when refolding the cabin and
closing the hood.
•
Should the machine touch high voltage lines,
- try to leave the area of danger with the machine
- do not leave the station
- warn others not to approach and touch the machi-
ne
•
Maintain the machine free of oil and inflammable
materials.
To follow safety messages
under all circumstances to
avoid risk of serious injury or
death.
To follow safety messages
under all circumstances to
avoid risk of injury.
To follow environmental
regulations to protect envi-
ronment (contamination of
water sources or soil).
! NOTE ! Pay attention to signs to
avoid damage of the ma-
chine.
NOTE:
Additional information for
operators.