Ammann ASC 200 Series, Operating Manual

Page: 69 / 198

69 ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
Stop engine - signal lamp 18
Stop the engine as soon as possible if this red lamp goes
on.
After the signal lamp goes on,
stop operation and engine
while keeping safety at work!
Do not start the engine before
the defect has been repaired!
Engine warning - signal lamp 19
This yellow lamp indicates a defect - the engine must be
checked.
Note
The searching fault engine see chap. 2.7.7.
! NOTE !
Repair the defect as soon as possible!
WTS (WAIT – TO – START) indicator lamp 21
Heating before the starting of the engine.
Battery charging - signal lamp 22
Indicates proper function of battery charging. The lamp
must go on at turning the ignition key 7 to ”I” position and
go off after the engine has been started.
! NOTE !
If it does not go off, detect the cause!
Brake signal lamp 23
This lamp (on) indicates that the machine is braked.
Zero position of neutral - signal lamp 24
This lamp indicates neutral position of the travel control;
the engine can be started in this position.
! NOTE !
Check the neutral position before start-
ing the engine!