Ammann ASC 200 Series, Operating Manual

Page: 75 / 198

75 ASC110/ASC130/ASC150/ASC200/ASC250
OPERATING INSTRUCTIONS
F9
F11 F12
F10
ATC connector 41
Use this connector to connect a service device (notebook)
in order to communicate with the control module (sus-
mic) and to troubleshoot.
Fuse box 42
Fuse (F1) -20 A (upper fuse) front + rear lights, front
p rear lights, auxiliary head-
lights, dashboard illumination, lifting
and lowering of bonnet and driver’s
stand, license plate illumination.
Fuse (F2) -10 A cabin illumination, horn, direction in-
dicators, beacon.
Fuse (F3) -7.5 A brake, brake signal lamp, brake lights,
magnets - transporting speed of
wheels, vibration magnets, vibration-
on signal lamp, back horn, hydraulic
oil level signal lamp, travel control
neutral position signal lamp
Fuse (F4) -7.5 A ATC (interaxle differential)
Fuse (F5) -5 A fuel gauge, revolution counter, hour-
meter, hydraulic oil thermometer,
charging signal lamp, air filter signal
lamp, stop engine signal lamp, en-
gine warning signal lamp, hydr. oil
filter warning lamp, WTS engine heat-
ing indicator lamp
Fuse (F6) -15 A ventilation fan, heating fan, front and
rear washers, front and rear wipers.
Fuse (F7) -20 A reserve (air conditioning)
Fuse (F8) -20 A engine diagnostics socket
! NOTE !
Replace fuse with fuse of the same rate
only!!!
Fuse (F9) - 50 A
Secures protection of electric pump used for lifting and
lowering of bonnet and driver’s stand.
! NOTE !
Replace the fuse with a genuine one of
the same rate 50 A.
Engine fuses
Fuse (F10) - 125A WTS engine heating
Fuse (F11) - 30 A engine electronics
Fuse (F12) radio