Ammann ASC 200 Series, Operating Manual

Page: 100 / 198

100 ASC110/ASC130/ASC150/ASC200/ASC250
2.7. Controlling and operation of the machine
96
1
2
•
Floating position can be used for shovelling the ma-
terial. The blade slides over removable skids 96.
It
can be also used for the regressive spreading and
evening of the material.
•
After finishing work with the blade secure it in the
upper position using both safety pull rods 1 and pins
2.
NOTE:
•
The functions in 4 positions
position 0 (initial position of the pedal)
position I. (blade moves down)
position II. (blade moves up)
position III. (blade is in floating position)
•
Volume of the shovelled material can be corrected by
lowering the blade (blade lever in ”I” position) or by
lifting it up (the lever is in ”II” position) dependently on
traction power of the machine.
•
Blade edges are removable and they can be turned by
180
o after their wear.
! NOTE !
Do not adjust the scrapers, do not carry
out any maintenance at the blade unless
it is lowered to the ground and the
engine stopped, or unless the blade is
secured by both safety links.
Do not work with the blade when it is
secured.
In case that only one link is secured, the
blade can be damaged.