Ammann ASC 200 Series, Operating Manual

Page: 149 / 198

149 ASC200/ASC250
MAINTENANCE MANUAL
1
2 2
1 1
1
Every 250 Hours or Once in 3 Months Every 250 Hours or Once in 3 Months
3.6.14. Checking batteries
•
Place the roller onto flat, firm surface.
•
Stop the engine and disconnect the electric system
using the isolating master switch.
•
Clean the surface of batteries.
•
Check the condition of poles and terminals 1 and
clean them. Slightly wipe terminals with grease.
•
Check the level of electrolyte after opening plugs of the
battery cells 2 - the level of electrolyte in all cells should
be 5 - 15 mm (0.2-0.6 in) above the plates, or to the
lower edge of the gauge in the battery cells. Refill the
cells whose electrolyte level is lower, than 5 mm (0.2
in) above the plates, with distilled water.
•
Measure electrolyte density in the individual cells
using a refractometer
or hydrometer.
•
Compare measured values with the chart.
NOTE
•
Check the level using a glass tube.
•
Should the machine not be used during winter period
- for couple of weeks, dismantle the batteries and
store them away from frosts. Check batteries and
charge level before and during storage.
! NOTE !
Keep the batteries dry and clean.
Close batteries after checking.
Refill battery with distilled water only -
never with acid.
Refill distilled water immediately before
working with the machine or before
recharging the battery.
Recharge insufficiently charged battery.
Recharge batteries dismantled from the
machine.
Open the plugs before recharging.
Do not disconnect the battery under
running engine.
y t i s n e D
i m c / g n 3 i ) e m u e B ( e B ° n
C ° 0 2
F ° 8 6
s c i p o r T
C ° 0 2
F ° 8 6
s c i p o r T
d e g r a h c y ll u f 8 2 , 1 3 2 , 1 ° 2 3 ° 7 2
d e g r a h c i m e s 2 , 1 , 1 2 1 ° 4 2 ° 6 1
e g r a h c - d e t s u a h x e
! y l e t a i d e m m i
2 1 , 1 8 0 , 1 ° 6 1 ° 1 1